Amashubhu okukhanyisa e-LED T8 angu-10W, 14W no-22W anokukhanya okuphezulu, okukhanyisa amaphrojekthi, angu-1200mm (4ft), asezingeni eliphezuluIzibani zamashubhu e-LED zokulungisa kabusha izinhlelo zokukhanyisa ezentengiselwano nezimboni
1. Ukunciphisa izindleko zokunakekelwa nokushintshwa kumaphrojekthi:Uma kuqhathaniswa namashubhu e-LED T8 avamile anengilazi noma izindlu zepulasitiki, asetshenziswa kakhulu kumaphrojekthi anesabelomali esiphansi, leli shubhu le-LED T8 elenzelwe amaphrojekthi linesakhiwo sezindlu se-aluminium esiqinile. Lisusa amaphutha angokwemvelo amashubhu engilazi nawapulasitiki — ukungakhiphi kahle ukushisa, ukwehla okukhulu kokukhanya phakathi nezinyanga ezi-3, ukuphila okufushane, kanye nezinto eziphuka kalula. Kubanikazi bamaphrojekthi namaqembu onjiniyela, lokhu kunciphisa kakhulu imvamisa yokushintshwa kwezibani ngesikhathi sesiqinisekiso, kwehlisa izindleko zomsebenzi wokulungisa endaweni kanye nokulahleka kwezinto zokusebenza, futhi kuqinisekisa ukusebenza kokukhanyisa okuzinzile kuso sonke isikhathi sokusebenza.
2. Ukugcinwa okuhle kwezinga lokukhanya, okwandisa ukuncintisana kwamabhidi ephrojekthi:Uma kuqhathaniswa namashubhu e-T8 azacile e-aluminium ane-chip eyodwa, le modeli eyenzelwe amaphrojekthi isebenzisa isinki yokukhipha ukushisa ye-aluminium ewugqinsi nama-LED anama-chip amabili. Iqinisekisa ukusebenza kahle okuphezulu kokukhanya, ngaphandle kokuncipha okuphawulekayo kokukhanya phakathi neminyaka emi-3. Uma izinga lokukhanya lifana, kudingeka izibani ezimbalwa, okunciphisa izindleko zokuthenga nezabasebenzi bokufaka izintambo. Lokhu kunikeza izinzuzo ezicacile zezindleko kuyo yonke impilo yomkhiqizo lapho kuqhathaniswa amabhidi namasu ephrojekthi.
3. Ukuphepha Nokuqina Okuthuthukisiwe, Kunciphisa Ingozi Yokonakala Ngemva Kokufakwa:Uma kuqhathaniswa nezilawuli eziyisisekelo zezinga lokuqala, leli shubhu le-T8 lezinga lezimboni linesilawuli esisebenza kahle kakhulu esingu-3A esinokuvikelwa ekukhuphukeni kwamandla kagesi okungu-2KV. Lokhu kuqinisekisa ukusebenza okuphephile nokuqinile nakakhulu lapho igridi kagesi ingazinzile, kunciphisa kakhulu ukwehluleka ngemva kokufakwa futhi kugweme umsebenzi wokulungisa kabusha obizayo.
4. Idizayini yokufaka esezingeni elifanayo, efanele izimo eziningi zokusetshenziswa:Leli shubhu le-LED le-T8 lezinga lamaphrojekthi lisebenzisa izilinganiso ezijwayelekile ze-T8 ezinezikhonkwane ezimbili kanye nomklamo wokuphakelwa kwamandla ovela emaphethelweni womabili, ngakho lingashintsha ngokuqondile izibani ezikhona ngaphandle kokulungisa okwengeziwe izibambi noma amasekhethi. Lifanele kakhulu amaphrojekthi okwakha amasha nawokuthuthukisa ukonga amandla ezakhiweni zamahhovisi, ezitolo zezitolo eziwuchungechunge, ezimbonini zokukhiqiza, ezindaweni zokugcina impahla, emagaraji okupaka angaphakathi nakwezinye izindawo zezentengiselwano nezimboni.
IMINININGWANE
| IGAMA LESIBANI | ISHUBHU LE-LED T8 ELINOKUKHANYA OKUPHAKEME | ||
| INOMBOLO YEMODELI | VS-T8-H10 | VS-T8-H14 | VS-T8-H22 |
| AMANDLA | 10W | 14W | 22W |
| UBUKHULU BESIBANI | 600*Ø26mm | 900*Ø26mm | 1200*Ø26mm |
| I-LUMEN | 1300lm | 1800lm | 2700lm |
| UHLOBO LWE-LED | Ama-LED e-SMD2835 anama-chip amabili | ||
| UKUSEBENZA KAHLE | 120-130lm/w | ||
| I-VOLTHI | 85-265Vac | ||
| ISILAWULI | Okokufaka kwamandla kagesi obubanzi nesici samandla esiphezulu (PF), i-driver engu-3A | ||
| I-ENGELI YOMSEBE | 120° | ||
| CCT | 6500K | ||
| INKOMBA YOKUNIKELA NGOMBALA (CRI) | 80-90Ra | ||
| OKWAKHIWE NGAKHO | I-aluminiumIkesi + Ikhava ye-PC / Umzimba osabalalisa ukukhanya okumhlophe njengobisi + Indandatho eluhlaza | ||
| INDLELA YOKUFAKA | Ukufakwa kwesibambi seshubhu / sephaneli yegridil (Ifanele zonke izinhlobo zezibambi zezibani ze-LED ezinamaphethelo amabili athola amandla kagesi) | ||
| ISIQINISEKISO | iminyaka engu-3 | ||
| ISIKHATHI SOKUPHILA | ISIKHATHI SOKUPHILA ＞5 iminyaka | ||
| UBUKHULU BEBHOKISI | 640*200*165mm | 940*200*165mm | 1240*200*165mm |
| INANI/IBHOKISI | 30 izingcezu | 30 izingcezu | Izingcezu ezingu-30 |
| ISISINDO ESIPHELELE/IBHOKISI | \ | \ | \ |
